PITS-UTP-M5
	TS-BNC for BNC	TS-M8 for Mini Din-8	TS-M6 for Mini Din-6	TS-M4 for Mini Din-4
	TS-USB-A for USB Type-A	TS-USB-B for USB Type-B	TS-USB-M5 Mini USB 5 pin	TS-USB-M4 Mini USB 4 pin

Testing your hub or Network card’s performance(10/100). You can also test a variety of network cables 
and diagnose cable problems with this Tester. Perfect for testing the twisted pairs on RJ-45-EIA 568A/568B
(AT&T 258A), 10 Base-T.

• Automatically runs all tests and checks for continuity, open, shorted and crossed wire pairs

• Testing your hub or Network card’s performance.
  Hub: 10 Base-T, 100 Base-T or N-way switching
  Network Card: 10Base-T / 100Base-T; Full or Half Duplex.

• Tests RJ-45-EIA 568A/568B (AT&T 258A), 10/100 Base-T

• Advanced design for easy testing

• Informative LED status lights showing test result.

• 9 volt battery for power (not included)

• Automatic turn off after 10 min. of idling.

• Switch to test LAN Hub and NIC; switch to cable to test CAT-5/CAT-6 cables.

• Able to test shielded cables. LED shows you if the cable is shielded or not.

• Remote Unit enable you to test long cables on remote location.

• Safety Approval:  CE & FCC

PITS-UTP-M5 NIC, Hub, and Network Cable (RJ-45) Tester